Ricoh Facsimile - Manual (Page 156)

Facsimile Features
146
8
❖ ❖ ❖ ❖ Line Priority Setting
Use this function to specify the line
of usage.
Note
❒ The display may differ depend-
ing on the line type you have.
❖ ❖ ❖ ❖ Program Economy Time
Use this function for specifying a
time for transmission when call
charges are low. See p.3 “Sending
at a Specific Time (Send Later)”.
Limitation
❒ You can program only one Econ-
omy Time.
Note
❒ If you make a mistake, press
[Clear] or the
{{{{Clear/Stop}}}} key be-
fore pressing [OK], and then try
again.
❖ ❖ ❖ ❖ On Hook Mode Release Time
Use this function to specify a time
to cancel On Hook mode after you
transmit using On Hook dialing.
• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
❖ ❖ ❖ ❖ Quick Operation Key
Frequently used functions pro-
grammed as Quick Operation keys
are shown on the menu immedi-
ately after the power is turned on.
The Quick Operation keys can be
programmed with the following
functions:
• Journal
• TX Status Display (Transmis-
sion File Status)
• Print Confidential RX File (Print
Confidential Reception)
• Print Memory Lock File
• Stored File
• Send Later
• Auto Document
• 2 Sided Original
• Closed Network
• Polling Transmission (Polling
Transmission)
• Polling Reception (Polling Re-
ception)
• Fax Header Print
• Label Insertion
• RX File Status (Reception File
Status)
• Forwarding
• Transfer Request
• Switch RX Mode (Reception
Mode Switch)
• Manual E-mail RX
(when the Internet Fax is set to
ON.)
• TX Status Report (Transmission
Status Report)
• Sender Settings
• E-mail TX Results(E-mail Trans-
mission Results)
Up to three functions can be pro-
grammed into a Quick Operation
keys.
A Select Quick Operation Key
you want to program.
B Select the function you want to
program in the Quick Opera-
tion Key .
JupterC2_Fax_EN-F_FM.book Page 146 Monday, November 29, 2004 3:48 PM