4more transmission functions – Ricoh Facsimile User Manual

Page 87

Advertising
background image

More Transmission Functions

77

4

More Transmission Functions

If Memory Runs Out While
Storing an Original

If you run out of memory while stor-
ing an original (free space reaches
0%), the message “

Memory is full.

Cannot scan more. Transmitting

only scanned pages.

Transmit-

ting only scanned pages.

” is dis-

played.
Press [Exit] to transmit stored pages
only.

Note

❒ In default, scanned pages are sent.

To change the settings to delete
scanned pages, contact your ser-
vice representative.

Parallel Memory Transmission

This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
l o ws y o u t o q u ic k ly d e t e rm i ne
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion. This is useful when you are in a
hurry and need to use the original for
another purpose.

Limitation

❒ Standard Memory Transmission is

used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and could

not be connected to

• With Send Later

• When you store an original for

Memory Transmission while
another communication is in
progress

• When two or more destinations

are specified

• When you send only an Auto

Document

• When an original is placed on

the exposure glass, and then
sent

• When you send messages stored

in the Document Server

Note

❒ You can turn this function on or off

with the User Parameters. See
p.166 “User Parameters” (switch
07, bit 2).

❒ Standard Memory Transmission

may be used instead of Parallel
Memory Transmission depending
on the optional equipment in-
stalled if there is not enough free
memory left.

❒ If you use this function, the Memo-

ry Storage Report will not be print-
ed.

❒ If the {{{{Clear/Stop}}}} key is pressed, an

original will jam or memory will
run out during Parallel Memory
Transmission stops. The Commu-
nication Result Report is printed
and files are deleted.

❒ When using Parallel Memory Trans-

mission, only the original pages are
printed without automatically
printing the total number of origi-
nals in “Fax Header Print”.

FaxAdEN_Chapter-4 Page 77 Wednesday, January 19, 2005 2:34 PM

Advertising