Ricoh Facsimile User Manual
Page 195
Using Administrator Settings
185
9
IIII
Enter the SEP Code.
Note
❒ To change the SEP Code, press
[Clear]
or the
{{{{Clear/Stop}}}} key,
and then try again. To change
the box name, press [Box Name],
and then repeat the procedure
from step
H
.
JJJJ
Press [Password].
Note
❒ If you do not want to program a
password, proceed to step
N
.
KKKK
Enter a password, and then press
[OK]
.
Note
❒ If you make a mistake, press
[Clear]
or the
{{{{Clear/Stop}}}} key be-
fore pressing [OK], and then try
again.
LLLL
Re-enter the password, and then
press [OK].
Note
❒ If you make a mistake, press
[Clear]
or the
{{{{Clear/Stop}}}} key be-
fore pressing [OK], and then try
again.
❒ To change the password after
pressing [OK], press [Change]
and repeat steps
K
and
L
, or
press [Cancel] and repeat the
procedure from step
J
.
MMMM
Press [OK].
NNNN
Press [OK].
OOOO
Press [Exit].
PPPP
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Deleting Information Boxes
This section describes how to delete
Information Boxes.
Limitation
❒ If messages have been programmed
in the box, you cannot delete the
box.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
JupterC2_Fax_EN-F_FM.book Page 185 Monday, November 29, 2004 3:48 PM