Ricoh Facsimile - Manual (Page 188)

Administrator Setting
178
9
Programming Initial Set Up of a Special
Sender
Use this function to program “Initial
Set Up” of a Special Sender. You can
also specify the Bypass Tray Paper
Size.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Program Special Sender].
EEEE
Press [Initial Set Up].
FFFF
Select the function you want to
program.
Note
❒ In this feature, “Authorized RX”
has the same settings as “Recep-
tion Settings”. See p.147 “Re-
ception Settings”.
Programming Authorized RX and
Special RX Function
A Select [Authorized RX] or [Special
RX Function] .
B Select [On] or [Off], and then
press [OK].
The illustration shows the “Au-
thorized RX” display as an ex-
ample.
Programming Bypass Tray Paper
Size
A Press [Bypass Tray Paper Size].
You can select a size from [Auto
Detect]
, [Standard Size], or [Cus-
tom Size] .
If you select [Auto Detect], pro-
ceed to steps
B and G.
If you select [Standard Size], pro-
ceed to steps
B, C, and G.
If you select [Custom Size], pro-
ceed to steps
B , and D to G.
B Select the size you want to pro-
gram.
JupterC2_Fax_EN-F_FM.book Page 178 Monday, November 29, 2004 3:48 PM