Ricoh Facsimile User Manual
Page 20
Transmission Mode
10
1
DDDD
Depending on the Confidential
Transmission type, use one of the
following procedures:
Default ID
A Check that [Default ID] has been
selected, and then press [OK].
Note
❒ To cancel Confidential Trans-
mission, press [Cancel]. The
display returns to that of step
C
.
Override ID
A Select [ID Override: ].
B Enter the Confidential ID (4-
digit number) using the num-
ber keys, and then press [OK].
“ID Override: ” and the entered
Confident ial ID are shown
above the highlighted [Confiden-
tial TX]
.
Note
❒ If you make a mistake, press
[Clear]
or the
{{{{Clear/Stop}}}} key
before pressing [OK], and
then try again.
❒ To cancel Confidential Trans-
mission, press [Cancel]. The
display returns to that of step
C
.
EEEE
Press [OK].
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode]
.
FFFF
Dial, and then press the
{{{{Start}}}}
key.
Note
❒ You can cancel the transmission
setup for Confidential Trans-
mission. See p.19 “Canceling a
Transmission”.
JupterC2_Fax_EN-F_FM.book Page 10 Monday, November 29, 2004 3:48 PM