Ricoh Facsimile - Manual (Page 175)

Using Administrator Settings
165
9
❒ This function is not available when
memory forwarding is performed
to a folder destination.
Memory Lock
When you switch Memory Lock on,
received messages are stored in mem-
ory and not printed automatically.
When a message is received in the
Memory Lock mode, the Confidential
File (
i) indicator blinks. To print this
message, enter the Memory Lock ID.
A user without the ID cannot print
the message. This prevents unautho-
rized users from seeing the message.
Preparation
To use Memory Lock, program the
Memory Lock ID, and then switch
Memory Lock on. See p.192 “Pro-
gramming a Memory Lock ID”.
Limitation
❒ This function is not available with
Internet Fax.
Note
❒ To store incoming documents from
Special Senders only in Memory
Lock, program each sender with
“Special Senders to Treat Differ-
ently”. See p.171 “Special Senders
to Treat Differently”.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Memory Lock RX].
EEEE
Select [On] or [Off], and then press
[OK]
.
Note
❒ To cancel this setting, press
[Cancel] . The display returns to
that of step D .
FFFF
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
ECM (Error Correction Mode)
If part of a transmission fails because
of a line problem, the lost data is auto-
matically resent. For this function to
work, the other machine must have
ECM. You can turn this function on or
off through the following procedure.
Limitation
❒ This function is not available with
Internet Fax.
JupterC2_Fax_EN-F_FM.book Page 165 Monday, November 29, 2004 3:48 PM