Original sizes difficult to detect – Ricoh Facsimile User Manual
Page 220
Appendix
210
11
❖
❖
❖
❖ Inch Version
× - Unable to auto detect
*1
Normally a length of about 420mm (16.5") can be scanned; however, it is only possi-
ble to specify a scanning size up to 432mm (17").
-
-
-
-Maximum scan area
The maximum scan area is shown below:
• Memory Transmission: 297
× 1,200mm/11" × 47" (W × L) from the ADF
• Immediate Transmission: 297
× 1,200mm/11" × 47" (W × L) from the ADF
Note
❒ During Immediate Transmission, the length of the scanning range can be-
come narrower than 1,200mm (47"), depending on the character size as
well as the settings on the destination machine.
• 297
× 432mm/11" × 17" (W × L) (from the exposure glass)
Original sizes difficult to detect
The machine has difficulty detecting the size of the following kinds of originals.
(When this happens, the receiving machine may not select print paper of the cor-
rect size.)
• documents placed on the exposure glass of sizes other than those listed in the
table below
• originals with index tabs, tags, or protruding parts
• transparent originals, such as OHP transparencies or translucent paper
• dark originals with dense text or drawings
• originals that contain areas of solid print
• originals that have solid print around their edges
• originals with glossy surfaces
• bound originals of more than 10mm (0.3") in thickness, such as books.
Length
*1
–approx. 9.8"
approx. 9.8"– ap-
prox. 10.8"
approx. 10.8"–
approx. 12.4"
approx. 12.4"–
Wi
dth
–approx.
9.6"
Ч
Ч
8
1
/
2
"
Ч11"L
F
L
approx.
9.6" – ap-
prox.
10.6"
11"
×8
1
/
2
"
K
11"
×17"L
11"
×17"L
11"
×17"L
approx.
10.6"–
11"
×8
1
/
2
"
K
11"
×17"L
11"
×17"L
11"
×17"L
JupterC2_Fax_EN-F_FM.book Page 210 Monday, November 29, 2004 3:48 PM