Ricoh Facsimile - Manual (Page 74)

Other Transmission Features
64
4
FFFF
Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page]
, and then press
[OK] .
The selected original position and
page opening orientation are
shown above the highlighted [2
Sided Original]
.
Note
❒ To cancel this mode, press [Can-
cel] . The display returns to that
of step C .
❒ Select [2 Sided from 1st Page] to
send a two-sided original from
the first page.
❒ Select [1 Sided for 1st Page] if you
want to send a cover letter as the
first page.
GGGG
Press [OK].
HHHH
Specify the destination, and then
press the
{{{{Start}}}} key.
Standard Message Stamp
Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: “Confidential”, “Urgent”,
“Please phone”, and “Copy to corres ...”
You can also program other messages.
Note
❒ While this function is in use, the
third line of the Label Insertion is
not printed. See p.75 “Program-
ming the Label Insertion”.
❒ When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
❒ To program a standard message,
use the Program / Change / De-
lete Standard Message function.
See p.157 “Programming, Chang-
ing, and Deleting Standard Mes-
sages”.
AAAA
Place the originals, and the select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.30 “Scan Settings”, Facsimile
Reference <Basic Features>
BBBB
Press [Sub TX Mode].
CCCC
Press [Std. Message].
JupterC2_Fax_EN-F_FM.book Page 64 Monday, November 29, 2004 3:48 PM