Ricoh Facsimile - Manual (Page 34)

Checking and Canceling Transmission Files
24
2
Resending a File
Machine memory stores messages
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
Preparation
You should select “Store for 24
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.166 “User Pa-
rameters” (switch 24, bit 0).
Note
❒ Files that could not be transmitted
will be kept for either 24 or 72
hours depending on how you pro-
gram this function. See p.166 “User
Parameters” (switch 24, bit 1).
AAAA
Press [Change / Stop TX File].
BBBB
Press [Transmit Failed File].
CCCC
Select the file you want to resend.
“TX failed” is displayed for files
that could not be sent.
Note
❒ If multiple destinations were
specified, only the destination
number appears.
❒ If multiple destinations were
specified, only the number of
unsent messages appears.
❒ To add a destination, press
[Add] , and then specify the des-
tination.
DDDD
Press [OK].
Note
❒ To cancel transmissions, press
[Cancel] . The display returns to
that of step C .
❒ Repeat from step C to resend
another file.
EEEE
Press [Exit].
The standby display appears.
Transmission starts.
JupterC2_Fax_EN-F_FM.book Page 24 Monday, November 29, 2004 3:48 PM