Quantum Data 802BT - Manual (Page 544)

534 Appendix A Command Reference
SROP
Set/Reset OPeration
Class
Description Sets or resets one or multiple power-on special modes (see GenOps image).
Command syntax SROP set_mask reset_mask
set_mask
Value to set.
reset_mask
Value to reset. Use this parameter to establish all bits with one command, or to
individually set, or reset bits without changing others.
The mask value is constructed as follows:
Mask value Description
1 Old format names. Enabling or disabling this mode with re-ini-
tialize the generator.
2 Digital friendly
4 Analog friendly
8 Display status on LCD
16 Reset HDCP Rx (Silicon Image friendly mode)
32 Calibrate
64 Clone
128 Key pad
256 Sony baud rate 9600
512 Programmable key pad
1024 Program mode
2048 Digital YC
b
C
r
mode
4096 DCS Priority mode
8192 HDCP Test mode
16384 Use hot-plug special format mode
32768 DVI mode (disables HDMI mode)
65536 Bypass “hot-plug” format special mode (for DVI and HDMI out-
puts).