Quantum Data 802BT - Manual (Page 90)

80 Chapter 5 Working with Images
Looping through images
You can set up a continuous cycling mode that draws all images in the image knob
listone-after-another in an infinite loop. When activated, the message “Loop Enabled”
appears on the display under test.
To enable image looping:
1. Using the Format knob, select a format compatible with the display under test.
2. Turn the Image knob clockwise beyond the last image in the Image list about one turn.
The message “Loop Enabled” appears on the display under test. After a second or two,
the first image in the cycle appears and the generator continuously cycles through the
test image list using a given format in this mode.
To disable image looping:
1. Turn the Image knob counter-clockwise to stop image looping.