Quantum Data 802BT - Manual (Page 733)

802BT/802R Video Test Generator User Guide 723
3006 Nothing to save
An attempt was made to save the contents of a custom image editing buffer when there
was no open custom image editing session to save.
3007 Overwrite ROM Image
A user defined test image can not be saved using the same name as that of a built-in test
image (case insensitive).
3008 Image save failed
Saving the contents of the custom image editing buffer failed for a reason other than those
reported by error codes 3005 or 3006.
3010 R, G or B 8-Bit video DAC setting out of range
A combination of system calibration factors, user calibration multiplier settings and video
output level settings have resulted in one or more calculated input values to go below zero
or above the analog video Digital-to-Analog Converter’s maximum limit of 255.
3011 R, G or B 6-Bit video DAC setting out of range
A combination of system calibration factors, user calibration multiplier settings and video
output level settings have resulted in one or more calculated input values to go below zero
or above the analog video Digital-to-Analog Converter’s maximum limit of 63.
3015 R, G or B 10-Bit video DAC setting out of range
A combination of system calibration factors, user calibration multiplier settings and video
output level settings have resulted in one or more calculated input values to go below zero
or above the analog video Digital-to-Analog Converter’s maximum limit of 1023.
3020 Kill EPROM image
Built in test images can not be removed from the firmware.
3025 Image not found
A test image of a given name could not be found as either a built-in test image in the
firmware or as a user defined custom image.
3050 Grayscale video DAC setting out of range
One or more internal calculations have resulted in an analog video DAC input grayscale
setting below zero or greater than 100% video level.