Wolf DCX-1000I - Manual (Page 115)

Wolf Cinema Owner's Manual B-15
P9 White y
P10 magenta x
P11 magenta y
P12 Cyan x
P13 Cyan y
P14 yellow x
P15 yellow y
examples:
(CCa?)
= What is the current color adjustment?
(CCa 1 661 341 332 575 144 93 320 330) = Set “max Drives” to these x/y coordinates
CCC Comprehensive Color Clear
The CCC command will copy the data from one of the comprehensive color setups into the
currently selected user setup (USer1-4). See CCS for a list of possible selections.
CCI Color Temperature
Use CCi to implement a color temperature from 3200K-9300K. This control changes just the
white point (x/y) of the current gamut, and is applied only if you are using color temperature
(CCS) as your “Select Color adjustment” choice.
CCs select Output Color
Use CCS to select a predefined or user-defined color palette for use with a given source.
0 = max Drives (default) 1 = Color Temperature 2 = SD Video 3 = HD Video 4 = User 1 5 = User
2 6 = User 3 7 = User 4
CHa Channel select
Use CHa to select a channel (1-99). This is the same as SrC command.
Cle Color enable
Enable a specific color to be projected on the screen (1=red, 2=green, 3=blue, 4=yellow, 5=cyan,
6=magenta, 7=white, 8=black). nOTe: Colors will always revert to white (full color) upon power-
up and if “exit” at presentation level.
ClP Clamping
Use CLP to define the blacklevel clamping location for the current signal (0 = Sync Tip, 1 = Back
Porch, 2 = Tri-level).
ClR Color
Set the color intensity (1-1000) for video images. The Clr value represents a percentage, e.g.
1000=100.0 % or 0505=50.5%.
COn Contrast
Use COn to set the contrast level (0-1000). The COn value represents a percentage, e.g.
1000=100.0 % or 0505=50.5%.
3.24 CCC
Comprehensive Color
Clear
3.25 CCI
Color Temperature
3.26 CCs
select Output Color
3.27 CHa
Channel select
3.28 Cle
Color enable
3.29 ClP
Clamping
3.30 ClR
Color
3.31 COn
Contrast
Appendix B ► Serial Communications