Wolf DCX-1000I - Manual (Page 95)

Wolf Cinema Owner's Manual 4-9
A variety of lenses can accommodate different throw distances and specific types of installations.
Refer to Section 6 - Specifications for details. To change a lens, follow the steps below. No tools
are required for “compact” lenses shown.
Turn off the projector, cool and unplug
nOTe: If necessary, a lens can be swapped out while the projector is running, but this can result
in dust being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to cool the lamp
before unplugging the projector. ensure that the lens cap is on.
WaRnInG
Unplug the projector.
Install the lens cap and press the lens release button.
See Figure 4.9.
Section 4 ► Maintenance
STEP 1 >
Figure 4.8. Lens Assembly
STEP 2 >
Figure 4.9. Depressing Lens Release
4.5 Replacing the
Projection lens