Wolf DCX-1000I - Manual (Page 87)

Wolf Cinema Owner's Manual 4-1
The projector is an international regulatory agency approved product designed for safe and
reliable operation. To assure complete safety at all times it is important to acknowledge the
following precautions while operating the projector.
WaRnInG
always power down the projector using appropriate procedure and disconnect
all power sources before cleaning or servicing.
WaRnInG
always remove the lens when shipping the projector.
WaRnInG
neVeR look directly into the projector lens.
The high brightness of this projector could cause permanent eye damage.
WaRnInG
For protection from ultraviolet radiation, keep all projector shielding intact
during operation.
CaUTIOn
Qualified personnel should perform installation ONLY.
Observe and follow all warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle alerts the user to important
operating and maintenance (servicing) instructions in the literature accompanying
the projector.
The lightning flash and arrowhead symbol within the equilateral triangle alerts
the user to uninsulated “dangerous voltage” within the projector’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
read all operating instructions prior to using the projector.
Operate the projector in an environment, which meets the operating range specified in
Section 6 – Specifications.
Do not operate the projector close to water, such as near a swimming pool. Do not
•
operate in extremely humid environments.
Do not place the projector on an unstable cart, stand or table. a projector and cart
•
combination should be used with care. Sudden stops, excessive force and uneven
surfaces may cause the projector and cart combination to overturn.
Only use Wolf Cinema-approved ceiling mount fixture, if the projector is to be •
ceiling mounted.
seCTIOn 4
Labels and Markings >
Projector Location >
MaInTenanCe
Instructions >
4.1 Warnings and safety
Guidelines