Wolf DCX-1000I - Manual (Page 150)

Wolf Cinema Owner's Manual E-1
aPPenDIX e
OPTIOnal InPUT MODUles
This module can display digital video input signals conforming to the DVi (Digital Visual interface)
single-channel standard.
Features
• Supports Digital Visual Interface (DVI) single-channel
• Supports VESA® Extended Display Identification Data (EDID™)
• Provides an active-loop-through using a DVI connector (conforming to the DVI
Specification)
The module accepts a serial digital 4:2:2 component video signal (yCbCr) via a single seRIal
In BnC connector. The signal can loop through the seRIal OUT BnC out to another device
(such as another projector). Inputs are 75Ω terminated.
SDI Features
• Accepts serial digital 4:2:2 component video (YCbCr)
• Provides both a SERIAL IN and a SERIAL OUT BNC connector includes status LEDs for
signal and error
• SMPTE 259M compatible
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be tiled across
multiple screen displays, overlapped for extra-bright displays, or distributed to additional
projectors for multiple, same-image screens.
Dual SD/HD-SDI Features
• Accepts and decodes up to two serial digital inputs
• Outputs up to two 10-bit YCbCr 4:2:2 video signals
• Provides input(s) to output(s) loop-through capability
• Supplies interchangeable inputs as part of the Picture-in Picture display
• SMPTE 259M compatible
DVI Input Module >
Serial Digital Input Module >
Dual SD/HD-SDI Module >