Wolf DCX-1000I User Manual
Page 89
Wolf Cinema Owner's Manual
4-3
Slots and vents in the projector provide ventilation. never block or cover these openings. This
ensures reliable operation of the projector and prevents overheating.
Do not place the projector over a radiator or heat register. The projector should not be placed
•
in an enclosure unless proper ventilation is provided.
Do not insert objects into the ventilation openings of the projector. They may touch dangerous
•
voltages or short-out components resulting in a fire or shock hazard. Do not spill liquids of
any kind into the projector. Should an accidental spill occur, immediately unplug the projector
and have it serviced by a qualified service technician.
if any of the following conditions exist, immediately unplug the projector from the power outlet
and ask a qualified service technician to look at it.
The power cord has been damaged.
•
The internal cooling fans do not turn on within two minutes when the projector is first powered
•
up.
liquid has been spilled into the projector.
•
The projector has been exposed to excessive moisture.
•
The projector is not operating normally or its performance has significantly deteriorated in a
•
short period of time.
The projector has been dropped or the shipping case (if applicable) has been badly
•
damaged.
WaRnInG
Do not attempt to service the projector yourself. all servicing must be performed by
Wolf Cinema accredited service technicians.
Use replacement parts that are manufacturer-approved only. Use of any other part other
than the ones specified by the manufacturer can result in fire, electric shock or other
damage.
Ventilation >
Servicing >
Section 4 ► Maintenance