Wolf DCX-1000I User Manual
Page 64
Wolf Cinema Owner's Manual
3-40
Section 3 ► Operation
Color Temp Adjust
nOTe: Keep new x,y coordinates within the original color gamut triangle shown here.
PROCeDURe FOR X,Y aDJUsTMenTs: See 3.10, Using Multiple Projectors.
Color Temp adjust: Use this submenu
if you do not have specific color
coordinates in mind and will simply
judge color performance by meter. like
the Color Adjustment by X,Y submenu,
each color control actually defines
new x/y coordinates for that color and
changes its hue — it is just a different
interface.
adjust the hue of each primary color
(red, green, blue, and white) by using
more or less of it in relation to the other
colors.
nOTe: A Color Temp Adjust
adjustment defines the corresponding x/y coordinates shown in
the Color Adjustment by X,Y submenu. These x/y coordinates will remain stable for this User
gamut until they are changed again via either menu. Values displayed in the Color Temp Adjust
menu, however, will likely fluctuate as you use the projector, and will be different when you return
to this menu at some point in the future. These floating changes do not affect the x/y coordinates
or gamut.
Figure 3.10. Chromaticity Diagram
(without Yellow Notch Filter)