GE Industrial Solutions AF-600 FP Fan & Pump Drive (230V to 60HP, 460_575V to 125HP) - Manual (Page 28)

4.1.2 Setting Keypad Display Values
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24V supply.
The information displayed on the keypad can be
customized for user application.
• Each display readout has a parameter associated
with it.
• Options are selected in the menu Keypad Set-up.
• Display 2 has an alternate larger display option.
• The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable. See 7 Status Messages for
definitions and details.
Display Parameter number Default setting
1.1 K-20 Motor RPMs
1.2 K-21 Motor current
1.3 K-22 Motor power (kW)
2 K-23 Motor frequency
3 K-24 Reference in percent
4.1.3 Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key Function
Status Press to show operational information.
• In Auto mode, press and hold to toggle
between status read-out displays
• Press repeatedly to scroll through each
status display
•
Press and hold [Status] plus [
▲
] or [
▼
] to
adjust the display brightness
• The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Quick Menu Allows access to programming parameters for
initial set up instructions and many detailed
application instructions.
• Press to access Quick Start for sequenced
instructions to program the basic frequency
controller set up
• Press to access Fan Macros, Pump Macros,
Compressor Macros, or Closed Loop for
sequenced instructions to program
applications
• Press to access Trending for realtime
logging on keypad display.
• Press to access Parameter Data Check for
changes in parameter data set.
• Follow the sequence of parameters as
presented for the function set up
Main Menu Allows access to all programming parameters.
• Press twice to access top-level index
• Press once to return to the last location
accessed
• Press and hold to enter a parameter
number for direct access to that parameter
Alarm Log Displays a list of current warnings, the last 10
alarms, and the maintenance log.
• For details about the drive before it entered
the alarm mode, select the alarm number
using the navigation keys and press [OK].
User Interface AF-600 FP Operating Instructions
25
4 4