GE Industrial Solutions AF-600 FP Fan & Pump Drive (230V to 60HP, 460_575V to 125HP) User Manual
Page 51
Operation
Status
Start delay
In F-24 Holding Time, a delay starting time was
set. A start command is activated and the
motor will start after the start delay time
expires.
Start fwd/rev
Start forward and start reverse were selected
as functions for two different digital inputs.
The motor will start in forward or reverse
depending on which corresponding terminal is
activated.
Stop
The drive has received a stop command from
the keypad, digital input or serial communi-
cation.
Trip
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, the
drive can be reset manually by pressing
[Reset] or remotely by control terminals or
serial communication.
Trip lock
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, power
must be cycled to the drive. The drive can
then be reset manually by pressing [Reset] or
remotely by control terminals or serial
communication.
Status Messages
AF-600 FP Operating Instructions
48
7
7