GE Industrial Solutions AF-600 FP Fan & Pump Drive (230V to 60HP, 460_575V to 125HP) - Manual (Page 75)

10.3.2 CE Compliance
Fuses or Circuit Breakers are mandatory to comply with IEC 60364. GE recommend using a selection of the following.
The fuses below are suitable for use on a circuit capable of delivering 100,000 Arms (symmetrical), 240V, or 480V, or 500V,
or 600V depending on the drive voltage rating. With the proper fusing the drive short circuit current rating (SCCR) is
100,000 Arms.
AF-600 3-phase Recommended fuse size Recommended max fuse Recommended circuit breaker Max trip level
[HP] [A]
1
gG-16 gG-25
PKZM0-25 25
2
3
5 gG-20 gG-32
7,5
gG-50 gG-63 PKZM4-50 50 10
15
20
gG-80 gG-125 NZMB1-A100 100
25
30 gG-125 gG-150
NZMB2-A200 150
40 aR-160 aR-160
50 aR-200 aR-200
NZMB2-A250 250
60 aR-250 aR-250
Table 10.7 200-240V, IP20/Open Chassis
AF-600 3-phase Recommended fuse size Recommended max fuse Recommended circuit breaker Max trip level
[HP] [A]
1
gG-20 gG-32 PKZM0-25 25
2
3
5
7,5
gG-63 gG-80 PKZM4-63 63 10
15
20 gG-80 gG-100 NZMB1-A100 100
25
gG-125 gG-160
NZMB2-A200 160 30
40 aR-160 aR-160
50 aR-200 aR-200
NZMB2-A250 250
60 aR-250 aR-250
Table 10.8 200-240V, IP55/Nema 12
Specifications AF-600 FP Operating Instructions
72
10 0