GE Industrial Solutions AF-600 FP Fan & Pump Drive (230V to 60HP, 460_575V to 125HP) - Manual (Page 32)

5. F-52 Minimum Reference. Set minimum internal
drive reference to 0Hz. (This sets the minimum
drive speed at 0Hz.)
6. F-53 Maximum Reference. Set maximum internal
drive reference to 60Hz. (This sets the maximum
drive speed at 60Hz. Note that 50/60Hz is a
regional variation.)
7. Press [Back] twice to return to Parameter Data Set
and scroll to Analog In/Out
8. Analog Input 53
9. AN-10 Terminal 53 Low Voltage. Set minimum
external voltage reference on Terminal 53 at 0V.
(This sets the minimum input signal at 0V.)
10. AN-11 Terminal 53 High Voltage. Set maximum
external voltage reference on Terminal 53 at 10V.
(This sets the maximum input signal at 10V.)
About Drive Programming AF-600 FP Operating Instructions
29
5 5