Replacing a converter fan assembly, Gps2424 replacement procedures, continued – GE Industrial Solutions Galaxy Verification User Manual
Page 83
Advertising
Galaxy Power System Verification Procedures
Issue 3 January 2008
Replacement Procedures 4 - 15
GPS2424 Replacement Procedures, continued
Replacing a
Converter Fan
Assembly
Step
Action
1
Remove adjacent rectifier from the shelf by loosening the
Allen-head retaining screw.
2
Disconnect the power wire connection.
3
Slide the fan latch to the left.
4
Remove fan assembly.
5
Replace fan assembly.
6
Replace power wire assembly.
7
Slide converter carrier into shelf.
8
Tighten retaining screw.
Advertising