Removing a rectifier, Gps4848 replacement procedures, continued – GE Industrial Solutions Galaxy Verification User Manual
Page 89
Advertising
Galaxy Power System Verification Procedures
Issue 3 January 2008
Replacement Procedures 4 - 21
GPS4848 Replacement Procedures, continued
Removing a
Rectifier
Step
Action
1
Turn off output circuit breaker on rectifier.
2
Turn off power switch on rectifier.
3
Turn off ac circuit breakers.
4
Wait 5 minutes to allow capacitors to discharge.
5
Using a 5mm Allen-head “T” wrench, slowly turn the
locking screw counterclockwise to release the rectifier from
the shelf.
6
Slowly slide rectifier from shelf.
Caution
Rectifier is heavy (65 pounds). Use two people to lift and
move rectifiers.
Do not rest rectifier on faceplate or rear chassis; damage
to faceplate and/or rear busbars will occur, rendering the
unit unusable.
Advertising