GE Industrial Solutions ASTAT XT - Manual (Page 52)

52 • Installation
Switch No. 4-20 mA* 0-20 mA 0-10VDC
S1 - Switch # 1 On On Off
S1 - Switch # 2 On On Off
S1 - Switch # 3 Off Off On
S1 - Switch # 4 Off Off On
S2 - Switch # 1 On Off Off
S2 - Switch #2 Not used Not used Not used
* Factory default setting
Notes:
(1) It is important that the ASTAT-XT is properly grounded and that the control module is tightly fastened to the
power module.
(2) Use twisted shielded cable for the thermistor connection.
5.8
Remote Key-Pad Installation
Remote key pad dimensions and cut out; Cable length is 1.5 meters
QTx0008-QTx0072 QTx0085-QTx1400
Remote key pad connection to various models of soft starters
Note: Add 20 mm to the depth dimension of the ASTAT-XT when optional remote key-pad is installed.