Anritsu Series MS278XB - Manual (Page 136)

Parameter Entry and Measurement Setup Dialog Archive Front Panel Menus
4-38 MS278XB OM
Adjacent Channel Power (ACP) Setup Dialog
Adjacent Channel Power (ACP) is a measure of the power that leaks into adjacent transmit channels. ACP
measures the power present in the adjacent transmit channels and can be set up as follows:
ACP Tab (1 of 2)
Channel Width: Sets the channel bandwidth.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Adjacent Channel: Toggles the adjacent channel
measurement off or on.
Adj Channel Width: Sets the bandwidth of the
adjacent channel.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Adj Channel Spacing: Sets the spacing between the
main and adjacent channel.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Alt1 Channel: Toggles the Alt1 channel
measurement off or on.
Alt1 Channel Width: Sets the bandwidth of the Alt1
channel.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Alt1 Channel Spacing: Sets the spacing between
the main and Alt1channel.
1 Hz to 8 GHz
Default: 10 MHz
Figure 4-15. Adjacent Channel Power Setup Dialog