Anritsu Series MS278XB - Manual (Page 76)

Graphical User Interface Overview Instrument Overview
3-24 MS278XB OM
Drop-down Selection Menus
Many menus offer drop-down selections that contain a variety of choices. To access a drop-down selection
menu, press on the down arrow for the parameter you would like to change and the drop-down selections
will expand. To make a selection, press on one of the choices, then press Done. The current selection is
highlighted at the top of the drop-down selection menu. Figure 3-18 below illustrates a drop-down
selection menu:
Parameter Entry and Measurement Setup Dialogs
Parameter entry and measurement setup dialogs are used throughout the system to provide direct access to
related parameters for a given context. These dialogs will generally look like the one shown in Figure 3-19,
below.
Not all parameters are set by using dialogs. Only those functions that have a complex set of parameters to set
use dialogs. Most SPA functions use parameter entry fields and buttons in the sub-menu display to set their
measurement parameters. Many VSA functions use dialogs to set their measurement parameters. Refer to
“Parameter Entry and Measurement Setup Dialog Archive” on page 4-36 for more information.
Figure 3-18. Drop-down Selection Menu
Note: A selection may also be entered with a rapid double press of the selection or by highlighting the selection,
then pressing the Enter key on the front panel or keyboard.
Figure 3-19. Parameter Entry and Measurement Setup Dialog