Anritsu Series MS278XB - Manual (Page 265)

Remote Operation Remote Desktop
MS278XB OM 7-3
Starting a Remote Desktop Session
Once you have enabled your analyzer to allow remote connections and have installed the client software
on a Windows-based client computer, you are ready to start a remote desktop session. You must first
establish a virtual private network connection or remote access service connection from your client
computer to your office network, or host computer.
To start a new connection:
1. Open Remote Desktop Connection by clicking:
Start | Programs (or All Programs) | Accessories | Communications | Remote Desktop
Connection.
2. This opens the Remote Desktop Connection dialog shown below:
3. Type the computer name, noted in Step 3 of the previous procedure, for the Signature analyzer.
4. Click Connect.
The Log On to Windows dialog box appears.
5. Signature is shipped from the factory with the following user name and password:
User Name: SignatureUser
Password: 2780
Figure 7-2. Starting a Remote Desktop Connection
Figure 7-3. Remote Desktop Connection Dialog