Anritsu Series MS278XB - Manual (Page 21)

General Information Product Description
MS278XB OM 1-5
External Interfaces
In addition to the visible front panel interfaces, the MS278XB provides the following device interfaces:
• IEEE488.2 GPIB: Connects the MS278XB to an external controller for remote programming. This
interface is detailed in the MS278XB Programming Manual, Part Number: 10410-00274.
• Printer: Provides a connection for printers with Parallel (Centronics) interfaces.
• XGA Output: Provides an Extended Graphics Array connector for an external monitor.
• PS/2 Keyboard and Mouse: Provides for the use of an external PS/2 keyboard and mouse.
• Ethernet: Provides network interface and control of the MS278XB. This interface is detailed in the
MS278XB Programming Manual, Part Number: 10410-00274.
• USB: Provides Type A USB ports on the front and rear panel to connect most USB compatible devices.
Identification Number
All Anritsu instruments are assigned a unique six-digit ID number, such as “040101.” This number is affixed to
a decal on the rear panel of each unit. In any correspondence with Anritsu customer service, please use this
number.
Options and Accessories
Table 1-1 and Table 1-2 lists Signature’s options and accessories with a brief description of each.
Table 1-1. Signature’s Available Options List
Option Number Option Description
Option 1 Rack Mount Adapter
Option 1A Slide Mount Adapter
Option 3 GPIB Interface
Option 22 30 MHz IF Bandwidth (includes baseband differential I & Q inputs)
Option 30 WCDMA Modulation Analysis
Option 38 QAM/PSK modulation analysis (requires Option 22)
Option 40 MATLAB Connectivity
Option 41 WiMAX Modulation Analysis
Option 52 Phase Noise Measurements
Option 98 Z540/ISO Guide 25 Calibration
Option 99 Premium Calibration
ES50MMD Extends Warranty to 5 Years
Table 1-2. Signature’s Optional Accessories
Part Number Optional Accessory Description
10410-00275 Signature MS278XB Maintenance Manual (Hard Copy)
1N50B Limiter/DC Block, N(m) to N(f), 50 W, 1 MHz to 3 GHz
1N50C Limiter, N(m) to N(f), 50 W, 10 MHz to 18 GHz
42N50A-30 30 dB Attenuator, 50 W N(m) to N(f)
12N50-75B 75 W Matching Pad, DC to 3 GHz, 50 W, N(m) to 75 W N(f)
11N50B Power Divider, 1 MHz to 3 GHz, 50 W, N(f) Input, N(f) Output
2100-1 GPIB Cable, 1M
2100-2 GPIB Cable, 2M
70-28 Headset