Anritsu Series MS278XB - Manual (Page 63)

Instrument Overview Front Panel Overview
MS278XB OM 3-11
1. To release the drive tray, insert a 1.0 mm diameter paper clip into the manual release hole as
shown in Figure 3-5.
2. Gently slide the tray open and remove your disk from the drive tray.
3. Remove the paper clip and carefully slide the drive tray completely closed.
If the drive tray does not slide smoothly, or there is excessive resistance, the mechanism may be
damaged and in need of service from an authorized Anritsu service center.
Figure 3-5. Manually Ejecting the CD-RW Drive Tray
15 mm
1.0 mm Diameter