Anritsu Series MS278XB - Manual (Page 46)

Remote Interface Setup Preparation for Use
2-22 MS278XB OM
11. If a connection needs to be manually set up or modified, you can right click on the connection name
in the Network Connections window (Figure 2-17) and select Properties from the pop-up dialog
box.
12. From the properties dialog above, select Internet Protocol (TCP/IP) and click on the Properties
button. From here, you can select to dynamically obtain an IP address automatically, or manually
configure your network connection.
Figure 2-26. Local Area Connection Properties
Figure 2-27. General Internet Protocol (TCP/IP) Properties