Anritsu Series MS278XB - Manual (Page 92)

Rear Panel and Connector Diagrams Instrument Overview
3-40 MS278XB OM
6
GPIB Interface IEEE 488 standard 24-pin connector that provides for remotely
controlling the MS278XB from an external computer/controller via
the IEEE-488 bus (GPIB). Table 3-10 describes the signal lines
and shows the connector pinout. IEEE 488.2
7
Parallel Interface 25-pin connector that provides a parallel interface to an external
printer. Table 3-11 describes the signal lines and shows the
connector pinout.
Interface is currently not available.
25-pin
D-Sub
8
Monitor Interface 15-pin XGA connector allows the MS278XB to send the front
panel touch screen display to an external VGA/XGA monitor.
Table 3-13 describes the signal lines and shows the connector
pinout. 15-pin
D-Sub
9
PS/2 Mouse
Interface
Provides connection to an external PS/2 mouse. 6-pin
DIN
Table 3-9. MS278XB Rear Panel Index Legend
Index Name/Image Description Connector