Anritsu Series MS278XB - Manual (Page 155)

Front Panel Menus Parameter Entry and Measurement Setup Dialog Archive
MS278XB OM 4-57
MATLAB Setup Dialog
The MATLAB Setup dialog allows you to launch The MathWorks MATLAB application. In this dialog, you can
toggle the MATLAB connection On and Off, and select which information to send (Active Traces and I/O
Vectors). For more information about using MATLAB, refer to “Signature–MathWorks Connectivity
(Option 40 only)” on page 6-1.
Basic Tab Connect to MATLAB: Toggles the MATLAB connectivity on or
off.
Select MATLAB Script to Run: Opens a dialog to select a
MATLAB script.
Type MATLAB Script: Sends the MATLAB script to run.
Run: Runs the MATLAB scripts above.
Script Results: Returns the results from the executed MATLAB
scripts.
MATLAB Handshake: Toggles the MATLAB handshaking on
or off. Handshaking allows you to know when Signature is
finished making a measurement and can be useful for such
things as storing or averaging multiple traces, where you need
to know when the trace data is new.
Figure 4-26. MATLAB Setup Dialog