MaxPower Corp Gamatronic Power+ M50-RM - Manual (Page 14)

Gamatronic Electronic Industries Ltd.
xiv POWER+ RM 50 K VA, N.Am. Std. – User Guide, Release 1.9
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
(SAVE THESE INSTRUCTIONS)
This manual contains important instructions for the Power+ RM50 3x208 Vac model.
The POWER+
UPS system is designed for industrial applications and harsh environments.
Nevertheless, the POWER+
UPS system is a sophisticated power system and should be handled
with appropriate care, following these guidelines.
Do’s …
 Read this manual carefully before starting installation and operation of the UPS.
 Review the safety precautions described below to avoid injury to users or damaging
equipment.
 All power connections must be completed by a licensed electrician who is experienced in
wiring this type of equipment, and who is knowledgeable about all federal, state, and local
electrical codes and regulations. Improper wiring may cause damage to the equipment
or injury to personnel.
 Pay attention to the warning signs, labels and marks on the unit. A warning sign signals
the presence of a possibly serious, life-threatening condition.
 This UPS is intended for installation in a temperature-controlled, indoor area that is
free of conductive contaminants.
 Keep the surroundings clean, uncluttered and free from excess moisture.
 Allow only qualified technicians to service the UPS. There are no user-serviceable
components. Do not try to repair it yourself!
 Use the UPS only for its intended purpose.
 The batteries should be installed as close to the UPS as is practically possible.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The battery drawer contains a series of 12-Volt batteries that provide high
voltage and energy in the UPS body even when the UPS is not connected to
the ac input. Appropriate precautions should be taken during installation,
inspection and servicing.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The UPS receives power from more than one source. Disconnection of all of
the ac sources and the dc source is required to de-energize this unit before
servicing.
ATTENTION - AVERTISSEMENT - RISQUE DE DÉCHARGE ÉLECTRIQUE MORTELLE :
Le module de batterie contient une série de batteries 12-Volt qui fournissent
une haute tension et l'énergie dans le corps de l'ondeleur même lorsque
l'onduleur n'est pas relié à l'entrée à A.C. Des précautions appropriées
devraient être prises pendant l'installation, l'inspection et l'entretien.