E-Mon E-PS-E-RTU-N - Manual (Page 4)

4 PowerSmart+ Power Quality Meter
Quick Start Guide
This section can be used by a licensed electrician to install and perform basic
POWERSMART+ PQM setup. For more detailed POWERSMART+ PQM setup
and use instructions, see the following chapters in this manual.
This quick start guide will assist you to have the unit running for the first
time.
During the operation of the meter, hazardous voltages are present in
the input terminals. Failure to observe precautions can result in
serious or even fatal injury or damage to equipment.
For complete and accurate in-depth instructions, refer to the following
chapters in this manual.
1. Installing the PowerSmart+ PQM
Mounting the PowerSmart + PQM Unit
To mount the PowerSmart + PQM:
1. Position the PowerSmart+ PQM unit in the square or
round cutout. If two PowerSmart+ PQM are
positioned side by side, take care of proper interval
between them.
2. Attach the PowerSmart+ PQM unit using washers
and nuts. Make sure that the unit is securely
attached into the wall or cabinet fixture.
Mounting the PowerSmart+ PQM (Square or Round Cut-out)