E-Mon E-PS-E-RTU-N - Manual (Page 8)

8 PowerSmart+ Power Quality Meter
2. Configure the device through the PowerSmart+ PQM
unit front panel display.
2. Configuring the PowerSmart+ PQM remotely
1. Install the Power Software tool on your PC.
2. Configure the Power Software database for your
meter.
3. Configure the Power Software communications
settings.
4. Upgrade the meter firmware if a new version is
available.
5. Set up the meter using the Power Software
application software.
6. Configure your security settings through the meter
security setup.
7. Configure your communication protocol settings.
8. Configure Billing/TOU registers.
At this stage, the PowerSmart+ PQM should be ready for operation.