E-Mon E-PS-E-RTU-N - Manual (Page 96)

Chapter 5 Configuring the PowerSmart+ PQM Configuring Billing/TOU
96 PowerSmart+ Power Quality Meter
Figure 5-16: Energy/TOU Setup Dialog Box – Billing/TOU Registers tab
2. Configure the register options according to the valid parameters
shown in Table 18.
Table 18: Billing/TOU Register Options
Parameter Options Default Description
Billing/TOU Registers
TOU Unchecked
Checked Unchecked Links tariff registers to the selected energy
source
Use Profile Unchecked
Checked Checked Enables recording energy registers in a daily
billing profile file (both total and tariff
registers if TOU is enabled).
Dmd Profile Unchecked
Checked Unchecked Enables recording maximum demand
registers in a daily billing profile file (both
total and tariff registers if TOU is enabled)
Sum Profile Unchecked
Checked Checked Enables recording total (summary) registers
in a daily billing profile file.
Units kWh, kvarh, kVAh,
m3, CF (cubic
foot), CCF
(hundred cubic
feet)
None The register measurement units. When a
register is linked to an internal energy
source, it is set automatically. When an
external pulse source is used, the user can
select a measurement unit for the register.
Register Source List
Source Input None
kWh Import
kWh Export
kvarh Import
kvarh Export
kVAh,
DI1-DI12 None Links an energy source to the register
Multiplier 0.001 to 100.000 1.000 The multiplication factor for the energy
source. Unchangeable for internal energy
sources.
Target Reg#1- Reg#4 None Defines the target billing register for the
energy source. It is set automatically.