E-Mon E-PS-E-RTU-N - Manual (Page 71)

Chapter 5 Configuring the PowerSmart+ PQM Configuring Communications
PowerSmart+ Power Quality Meter 71
Setting Up GPRS Network
The PowerSmart+ PQM can provide wireless GPRS communications with
the remote MODBUS/TCP server via the GPRS modem module. See
Connecting a GSM/GPRS modem in Chapter 2 on how to connect a
modem to your meter.
Using the Front Display
Select GPRS interface from the COM2 Setup menu. This menu entry
appears only if the optional GPRS module is plugged into the
meter. It allows you to set up the meter network address and the default
gateway.
See Viewing and Changing Setup Options in Chapter 3 for information on
configuring parameters via the front display
Device Setup
Reset
Real Time Clock
Display Setup
Basic Setup
Device Options
COM1 Setup
COM2 Setup
COM2 Setup
Protocol
Interface
Device Address
Modbus RTU
GPRS
1
Using Power Software
To set up GPRS communications:
1. Select Communications Setup from the Meter Setup menu,
and then click on the GPRS Setup tab.
Figure 5-3: Communication Setup Dialog Box – GPRS Setup Tab