E-Mon E-PS-E-RTU-N - Manual (Page 65)

Chapter 4 Using Power Software Authorization
PowerSmart+ Power Quality Meter 65
Downloading Setups to the Meter
You can update each setup in your meter one at a time or download all
setups together from the site database.
Individual Download
To update a particular setup in your meter:
1. Check the On-line button on the Power Software toolbar
2. Select a meter site from the list box on the toolbar.
3. Select the desired setup group from the Meter Setup menu. Click
on the setup tab you want to download to the meter. As the
setup dialog box opens, Power Software retrieves and displays
the present meter setup data.
4. If you wish to download a setup saved in the site database, click
Open, and then click OK, or fill in the boxes with the desired
configuration data for your device.
5. Click Send.
Batch Download
To download all setups to your device at once:
1. Check the On-line button on the Power Software toolbar
2. Select the device site from the list box on the toolbar.
3. Select Download Setups from the Meter Setup menu.
Uploading Setups from the Meter
Individual Upload
To get a particular setup from your device:
1. Check the On-line button on the Power Software toolbar.
2. Select a meter site from the list box on the toolbar, and then
select the desired setup group from the Meter Setup menu.
3. Click on the tab of the setup you want to read from the meter. As
the dialog box opens, Power Software retrieves and displays the
present setup data from the meter. Click Receive if you wish to
retrieve the meter setup once again.
4. To store the setup to the meter
site database, click Save As, and
then click OK.
Batch Upload
To upload all setups from the device to the site database at once:
1. Check the On-line button on the toolbar.
2. Select the device site from the list box on the toolbar.
3. Select Upload Setups from the Meter Setup menu.
4.5 Authorization
If communications with your meter is secured, you are prompted for the
password when you send new setup data to the meter.