E-Mon E-PS-A-RTU-N - Manual (Page 39)

Chapter 3 Display
O P E R A T I O N S S T A T U S D I S P L A Y
PowerSmart+ Advanced Power Quality Meter 39
TOU Energy Register 8
8 rEG.8
trF.8
MWh Tariff 8 reading
Status Display
The meter has separate status information pages accessible through the primary
device menu. The Status Display shows rarely used information that is especially
helpful when connecting the meter inputs and outputs to external equipment. For
information on navigating in the menus, see
Using the Menus .
To enter the Status Display:
From the Data Display, press the SELECT button to enter the primary device menu. The
“StA” window is highlighted.
Press ENTER to enter the Status Display. Use the UP and DOWN arrow buttons to
scroll through the status pages.
To exit the Status Display:
Press ESC to return to the primary device menu.
Press ESC to return to the Data display.
Status Display
1 PhS
rot
POS/nEG/Err Phase rotation order
2
AG. V1 angle
V2 angle
V3 angle Voltage angles (±180°, referenced to
V1)
3
AG. I1 angle
I2 angle
I3 angle Current angles (±180°, referenced to
V1)
4 rEL
1.2.
00 Relay status
5 St.In
1.2.
00 Status inputs
6 Cnt.1
Counter #1
7 Cnt.2
Counter #2
8 Cnt.3
Counter #3
9 Cnt.4
Counter #4
10 batt
nor/Lo Backup battery status (Normal/Low)
ENERG
Y
StA
CHG
OPS
SELECT
ENERG
Y