E-Mon E-PS-A-RTU-N - Manual (Page 85)

Chapter 4 Power
S O F T W A R E C O N F I G U R I N G R E C O R D E R S
PowerSmart+ Advanced Power Quality Meter 85
Select the sampling rate for waveforms.
Select the number of cycles to be recorded prior to the event, and a total number of cycles
in the waveform.
Add the name for your waveform log file in the “Name” box. It will appear in the waveform
reports.
To select the AC channels, click on the Channels button, check the boxes for channels you
want to be recorded, and then click OK.
Save your waveform setup to the device database, and send it to the meter.