E-Mon E-PS-A-RTU-N - Manual (Page 58)

Chapter 4 Power
S O F T W A R E A U T H O R I Z A T I O N
58 PowerSmart+ Advanced Power Quality Meter
Select the device site from the list box on the Power Software toolbar, and then
select the desired setup group from the Meter Setup menu. Click on the tab with the
setup you want to create or modify, and then fill in the boxes with the desired
configuration data for your device. Click the “Save as…” button to store the data to
the site database.
Always set up and store the Basic Setup data to the site database first. Power
Software uses this data as a reference when arranging other meter setup.
To save your setup to another site database, select it from the file pane. Click OK.
To reuse setups from another site, copy them to your present site database. Click
Open, select the desired site database, and click OK. The opened setup is copied to
your site database.
You can also copy all setups from one site database into another site's database. Select a
device site from the list box on the toolbar from which you want to reproduce setups, and
then select “Copy to...” from the Meter Setup menu. Select the site database to which to
copy setups, and click OK.
Downloading Setup to the Meter Downloading Setup to the Meter Downloading Setup to the Meter Downloading Setup to the Meter
You can update each setup in your meter one at a time or download all setups
together from the site database.
To update a particular setup in your device, check the On-line button on the Power
Software toolbar, select a meter site from the list box on the toolbar, and then select
the desired setup group from the Meter Setup menu. Click on the tab of the setup
you want to download to the meter, and then click Send.
To download all setups to your device at once, check the On-line button on the
toolbar, select the device site from the list box on the toolbar, and then select
Download Setups from the Meter Setup menu.
Uploading Setup from the Meter Uploading Setup from the Meter Uploading Setup from the Meter Uploading Setup from the Meter
To upload the setup from the device to the site database, check the On-line button
on the toolbar, select the device site from the list box on the toolbar, and then select
Upload Setups from the Meter Setup menu.
Authorization
If communications with your device is secured, you are prompted for the Password
when you send new setup data to the meter.
Enter the Password and click OK. If your authorization was successful, you are not
prompted for the Password again until you close the dialog window.
Configuring Communications in your Meter
This section describes how to configure communication ports in your meter through
Power Software.