E-Mon E-PS-A-RTU-N - Manual (Page 49)

Chapter 3 Display
O P E R A T I O N S M E N U O P E R A T I O N S
PowerSmart+ Advanced Power Quality Meter 49
Label Parameter Options Description
Lo Zero scale 0-999,999 The low engineering scale (in
primary units) for the analog input
corresponding to a lowest (zero)
input current (0 or 4 mA)
Hi Full scale 0-999,999 The high engineering scale (in
primary units) for the analog input
corresponding to a highest input
current (1 or 20 mA)
dEc.P Number of
decimal places 0-3 The number of decimal digits in a
fractional part of the scaled
engineering value
Analog Outputs Setup Analog Outputs Setup Analog Outputs Setup Analog Outputs Setup
This entry appears only if the meter is ordered with optional analog outputs. For
more information on configuring analog inputs in your meter, see
Programming
Analog Outputs in Chapter 4.
To enter the menu, select the “A.Ou.1” or “A.Ou.2” entry from the Main menu for the
AO1 and AO2 output respectively, and then press the ENTER button.
To change the analog output options:
Use the UP and DOWN arrow buttons to scroll to the desired parameter.
Press the SELECT button to activate the lower window.
Use the UP and DOWN arrow buttons to adjust the parameter value.
Press ENTER to confirm the new parameter setting, or press ESC to discard changes.
You are returned to the middle window to select another parameter, or store your new
settings and exit the menu.
To store new settings and exit the menu:
When the middle window is highlighted, press the ENTER button.
You return to the Main menu.
To exit the menu without saving your changes, press ESC.
The following table lists available analog output options. For a list of the available output
parameters and their scales, see
Programming Analog Outputs in Chapter 4.
Label Parameter Options Description
OutP Output
parameter See Appendix B Selects the measured parameter to
be transmitted through the analog
output channel.
Lo Zero scale Low engineering scale (in primary
units) for the analog output
corresponding to a lowest (zero)
output current (0 or 4 mA)
Hi Full scale High engineering scale (in primary
units) for the analog output
corresponding to a highest output
current (1 or 20 mA)
A.Ou.
ESC
A.Ou.
rt.U1
OutP
A.Ou.
0
Lo
A.Ou.
Hi