System Sensor PDRP-2001 - Manual (Page 109)

109 PDRP-2001 Series Manual — P/N 53043:E1 2/28/2011
Appendix B: FACP Configuration Templates
The PDRP-2001 has been provided with preprogrammed templates which allow the user to quickly
configure the FACP [refer to “FACP CONFIG (Application Templates)” on page 51]. The user
also has the option to reprogram selected portions of the template for customized applications. The
following pages of this appendix describe the programming for each of the templates.
Important! Each Template has been programmed with specific Input Zone Types and Output
Circuit Types. If the FACP is configured with one of the preprogrammed Templates, the user must
ensure that the devices connected to each Input Zone and Output Circuit are compatible with the
programmed types. (The user can reprogram the circuit types if desired).
NOTE: The PDRP-2001 Pre-Action/Deluge Control Panel can be configured using
preprogrammed Templates 1 through 7.