System Sensor PDRP-2001 - Manual (Page 98)

98 PDRP-2001 Series Manual — P/N 53043:E1 2/28/2011
Operating Instructions Read Status
4.15.8 Daylight Savings
Pressing 2 while Read Status Screen #3 will cause the following screens to be displayed:
These screens allow the operator to view settings that have been programmed for Daylight Savings
Time.
4.15.9 History
Pressing 3 while viewing Read Status Screen #3 will display the following screens:
The operator can view all events which have been stored in the history file, only alarms or other
events, such as troubles or supervisories, by pressing the corresponding number key.
4.15.10 Print
To print control panel data, press 1 while viewing Read Status Screen #4. This allows printing to
the printer connected to the ANN-S/PG module. The following screens will be displayed:
DAYLIGHT SAVINGS
ENABLED YES
START MONTH MAR
START WEEK WK 2
DAYLIGHT SAVINGS
END MONTH NOV
END WEEK WK 1
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
READ STATUS
1=PRINT
2=ANN-BUS
Read Status Screen #4
PRINT
1=HISTORY
2=WALKTEST LOG
3=EXIT PRINTING