ADTRAN 600R - Manual (Page 219)

61200624L1-1B © 2004 ADTRAN, Inc. 217
DLP-13 Saving and Loading Text Configuration using Terminal
Command Line
Introduction
The Total Access 6XX has the ability to download a text file which contains the configuration of the entire
unit. This configuration may then be altered in a text editor and uploaded to any Total Access 6XX.
This DLP will explain how to save and load the text configuration file for the ADTRAN Total Access
6XX.
Prerequisite Procedures
You must connect to the Total Access 6XX with a VT100 terminal session (reference DLP-1, Connecting
a VT100 Terminal or PC to the CRAFT Port).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.