Additel 221A Multifunction Temperature Calibrator User Manual - Manual (Page 72)

________________________________________________________________________________________________________________
65
Figure 10.10 AsCal (Data Mode)
AsCal calibration.
If you do not want to save the calibration results and continue to
calibrate the UUT, you can press ReCal to return to the AsCal running
page.
If you want to accept the calibration results, and save the data. Press the
Save then select the save options.
If the UUT is a HART‐Transmitter, the Adjust will be enabled.
Press Enter or Finish, thenfinish the whole AsCal calibration.