GW Instek PSW-Series Programming & Command manual - Manual (Page 15)

GETTING STARTED
15
Function Keys The Function keys along with the Output key will
light up when a key is active.
Function
The Function key is used to
configure the power supply.
OVP/OCP
Set the over current or over
voltage protection levels.
Set
Sets the current and voltage limits.
Test
Used to run customized scripts for
testing.
Lock/Local
Locks or unlocks the panel keys to
prevent accidentally changing
panel settings.
PWR DSPL
Toggles the display from viewing
V/AV/WA/W.
Display
Indicators VSR Voltage Slew Rate
C V Constant Voltage Mode
RMT Remote Control Mode
ALM Alarm on
DLY
Delay Output
C C
Constant Current Mode
ISR
Current Slew Rate