GW Instek PSW-Series Programming & Command manual - Manual (Page 23)

GETTING STARTED
23
Steps 6. Hold the Function key whilst
turning the power on.
7. The display will show F-90 on the
top and the configuration setting
for F-90 on the bottom.
A
W
V
W
%W 100 80 60 40 20
ISR
C C
DLY
ALM
RMT
C V
VSR
Function OVP/OCP Set Output
PWR DSPL Lock/Local Test
PSW 30-36 360W
Voltage
Current
Multi-Range DC Power Supply
8. Rotate the voltage knob to change
the F setting.
Voltage
Range F-90~ F-95
9. Use the current knob to set the
parameter for the chosen F setting.
Current
10. Press the Voltage knob to save the
configuration setting. ConF will be
displayed when successful. Voltage
Exit
Cycle the power to save and exit the configuration
settings.