GW Instek PSW-Series Programming & Command manual - Manual (Page 61)

REMOTE CONTROL
61
OUTPut:MODE
Set
Query
Description Sets the PSW output mode. This is the equivalent
to the F-03 (V-I Mode Slew Rate Select) settings.
Syntax
Return Syntax OUTPut:MODE {<NR1>|CVHS|CCHS|CVLS|CCLS}
OUTPut:MODE?
Parameter 0 CV high speed priority
CVHS CV high speed priority
1 CC high speed priority
CCHS CC high speed priority
2 CV slew rate priority
CVLS CV slew rate priority
3 CC slew rate priority
CCLS CC slew rate priority
Return parameter <NR1> Returns the output mode.
OUTPut[:STATe][:IMMediate]
Set
Query
Description Turns the output on or off.
Syntax
Query Syntax OUTPut[:STATe][:IMMediate] { OFF | ON | 0 | 1 }
OUTPut[:STATe][:IMMediate]?
Parameter 0 <NR1> Turns the output off.
OFF Turns the output off.
1 <NR1> Turns the output on.
ON Turns the output on.
Return parameter <NR1> Returns output status of the instrument.
OUTPut[:STATe]:TRIGgered
Set
Query
Description Turns the output on or off when a software trigger
is generated.
Syntax
Query Syntax OUTPut[:STATe]:TRIGgered { OFF | ON | 0 | 1 }
OUTPut[:STATe]:TRIGgered?